Published at Friday, July 06th, 2018 - 12:45:08 PM. . By Marie Graff.
Engineer closing flaps with overlapping sections of band near the arms and back. Indicate button-and-loop closure placement. Mark matching notches and construction notes on the muslin. Make skirt, creating overlaps to match band overlaps. Mark center of legs for inverted pleat. 7. Take apart, fold seat muslin at center, cut out pattern adding seam allowances. Add seam allowances to band and skirt sections. 8. Finish interior of chair cover with folded up edges and hems (below). Attach button loops to inside, too.
"Drape" a muslin pattern - Have on hand pieces of muslin large enough to accommodate each pattern piece needed for your chair slipcover. Position the chair on the floor or on a table so that you can work comfortably. Smooth the fabric over the seat; pin folds, ripples, and puckers into darts where needed. Mark the centerline from back to front, then work on one-half of the chair. Trace a stitching line from the chair seat, mark around the arms and back, cut out with a seam allowance, and clip corners. Use strips of muslin to make bands, positioning and pinning them to the seat.
Any content, trademark’s, or other material that might be found on the Editing Service Online website that is not Editing Service Online’s property remains the copyright of its respective owner/s. In no way does Editing Service Online claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
© Copyright 2018 Editing Service Online. All Rights Reserved.